Swivel Base Set 169-C (42.4mm)
In Stock
Code: 169C
Please add your desired product(s) to the quote.
Once you have submitted your quote request, you will receive a quote within 48 hours (Monday – Friday).
Are you looking to purchase from the UK? Why not check out our dedicated UK based scaffolding and construction website
Scaffolding Direct.
Complete locating swivel. Swivel has a travel of approximately 85° from the vertical in each direction.
Complies with B.S. EN1461. Intended for: Alloy tube and Steel tube.
Can be used for Handrails, Walkways, Edge Protection, Racking, Guardrails, Balustrades.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Material - Blackheart malleable iron casting (BS EN 1562:1997) using grade B32-10 material with a hot dipped galvanised finish (BS EN 1461:1999)
Equivalent Product to:
| Interclamp | 169 |
| Keeklamp | c58 |
| Fastclamp | C46 |
| Alvin | A52 |
All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slipload of 900kg
AN ENTIRE STRUCTURE SHOULD NOT BE CONSTRUCTED FROM SWIVEL FITTINGS
ALONE, AS THESE WOULD NOT PROVIDE SUFFICIENT STABILITY OR RIGIDITY
IN THE STRUCTURE DUE TO THE FREE ROTATION OF THE FITTING
THIS FITTING IS NOT RECOMMENDED FOR USE AS A BASE PLATE FOR GUARDRAILING
Also available in 33.77 mm pipe clamp and 48.3mm key clamp
