Tube Clamp or Pipe Clamps for 33.7mm tube. This malleable iron casting is also available in 48.3mm tube clamps.
Used for mounting boards almost flush with tubes. The fixing holes suit a wide range of common mechanical and chemical masonry anchors. The tube cannot be joined to another piece of tube within the fitting.
To secure this fixing you can use an M10 through bolt.
Info | Detail |
Manufacturing Standard | B.S. EN1461. |
Material | Blackheart malleable iron casting (BS EN 1562:1997) using grade B32-10 material with a hot dipped galvanised finish (BS EN 1461:1999) |
Allen Key Size | 1/4 |
Weight | 0.46kg |
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slipload of 900kg